The LED lamps were purchased from Maine-based Eco-Story. Most of the company's LED bulbs sell for between $45 and $85. According to Smith, Orvis expects to recoup its costs on the lamps in a little under a year and may expand the use of LED lamps to its flagship stores and other retail stores in its chain. Orvis has made a commitment to carbon neutrality by 2020 because many believe that manmade carbon waste in the atmosphere is creating global warming.Efficiency Vermont Senior Project Manager Dan Mellinger said the independent nonprofit was "not necessarily supporting (led high bay light) across the board" but wanted to continue to test their performance, the lamps' longevity and other factors because it had shown promising results to date.
Citizen uses its original multi chip technology for producing single LED’s with high performance and reliability. In addition to other benefits Citizen LED’s will also significantly reduce the overall manufacturing cost by reducing the component count on each light device. One of their LEDs have also been tested at Junction Temperature =120 deg C for 20,000 hours and have brightness of above 93.7%.Lynk Labs AC LED technology is now being integrated into products by a number of OEMs in various markets.
The President of SCI Mr. Vick Aggarwala, who is a veteran in the electronics business for more than 33 years, said with increasing environmental concerns and costs the world is set to embrace the LED technology for all the lighting requirements. They are very excited to be in partnership with Citizen to spear head the LED based product development in the ASEAN region. They will provide all technical support necessary for developing the long life LED lighting products.This could one day lead to maximizing led high bay light system efficiency by tuning a BriteDriver AC LED power supply to match the RLC components of a specific LED or light engine. The result could enable up to 98% system efficiency, according to Lynk.
2014年4月9日星期三
2014年4月8日星期二
the market potential for LED lamps and luminaires
Greiner comes to Everlight after six years at Osram Opto Semiconductor where he served as Senior Director Sales Europe and Emerging Markets. Before that Greiner spent seven years at Siemens Semiconductor in various sales positions. He has more than 13 years experience in semiconductors sales and holds a Master's degree in electrical engineering from the University of Cooperative Education Stuttgart, Germany.Bridgelux says that its led high bay light Arrays have been specifically developed to provide lamp and luminaire manufacturers with a solution that will simplify system level integration thereby reducing the system cost. The array can be used in applications including task, accent, spot, track, down light, wide area and security lighting. Bridgelux estimates the market potential for LED lamps and luminaires, alone, to be approximately $10 billion per year by 2012.
Bridgelux says its LED Array product suite is designed to deliver performance comparable to standard incandescent, halogen, compact fluorescent, and high intensity discharge (HID) lamps. The LED Arrays range from 400 to 2000 lumens and are offered in warm, neutral and cool white color temperatures. Additionally, the LED Arrays offer improved energy efficiency, lower maintenance cost and elimination of hazardous materials, such as mercury or lead found in traditional lighting technologies—all while delivering a uniform, high quality light source. Bridgelux’s LED Arrays are RoHS compliant and are tested and binned to an ANSI/Energy Star compliant binning structure.
Jason Posselt, Bridgelux director of marketing stated Bridgelux’s innovative packaging technology not only offers a light source that can be seamlessly integrated into a luminaire, but also delivers increased usable light through a simplified thermal design. These products have been designed with the end application in mind, focusing on delivering both the quantity and quality of light required for general lighting applications together with an ability to significantly reduce the cost of led high bay light. They believe that the Bridgelux LED Array technology will enable their customers to optimize their overall system design, greatly reducing their SSL manufacturing costs.
Bridgelux says its LED Array product suite is designed to deliver performance comparable to standard incandescent, halogen, compact fluorescent, and high intensity discharge (HID) lamps. The LED Arrays range from 400 to 2000 lumens and are offered in warm, neutral and cool white color temperatures. Additionally, the LED Arrays offer improved energy efficiency, lower maintenance cost and elimination of hazardous materials, such as mercury or lead found in traditional lighting technologies—all while delivering a uniform, high quality light source. Bridgelux’s LED Arrays are RoHS compliant and are tested and binned to an ANSI/Energy Star compliant binning structure.
Jason Posselt, Bridgelux director of marketing stated Bridgelux’s innovative packaging technology not only offers a light source that can be seamlessly integrated into a luminaire, but also delivers increased usable light through a simplified thermal design. These products have been designed with the end application in mind, focusing on delivering both the quantity and quality of light required for general lighting applications together with an ability to significantly reduce the cost of led high bay light. They believe that the Bridgelux LED Array technology will enable their customers to optimize their overall system design, greatly reducing their SSL manufacturing costs.
2014年4月4日星期五
lighting emitters are growing
The technology has been used on emitters for backlight modules, automobile lamps, architectural indoor and outdoor lights, signage boards, and commercial lights. The company’s EHP-L02N emitters boast junction-to-sink temperature of only three degrees centigrade per watt. The emitters come in warm-white and white types, with the former giving off luminous flux of 500lm and the led high bay light. The emitters have been built into 20W and 25W streetlights. The 20W light generates 1,100 lumens at 1.8 ampere and the 25W light gives off 1,300 lumens at 2.2A.
With some unique packaging technology, the company’s EHP AX08 family of single-chip 10W emitters boasts efficiency of over 80lm per watt at 350mA. Thermal resistance is blow 15 degrees centigrade per watt. In addition to ceramic, the company also uses aluminum as packaging substrate. Both are good thermal-conductivity materials. To illustrate the power of its emitters, Everlight is demonstrating its Dolphin SL family of LED streetlights, which are equipped with its emitters. The 120W streetlights give off around 90-100 lumens per watt at 100-240 voltage and boast a power factor higher than 99%. "We guarantee a 20,000-hour life span for the light. The streetlight has passed the IP65 test for waterproof and dust-proof quality.
Eric Lu says that orders for the company’s lighting emitters are growing, helped by competitive pricing. He concedes that the lights using his company’s emitters are still pricier than traditional lamps, but notes that LEDs are more durable. If more people buy LED lamps, prices will fall more quickly, he says.Its 0.5W emitter is used in the led high bay light bars of refrigerators, and its 1W, 3W and 5W emitters have gone into streetlights, residential lights, signage boards and commercial lights. Its high-power emitters deliver efficiency of over 90lm per watt.
With some unique packaging technology, the company’s EHP AX08 family of single-chip 10W emitters boasts efficiency of over 80lm per watt at 350mA. Thermal resistance is blow 15 degrees centigrade per watt. In addition to ceramic, the company also uses aluminum as packaging substrate. Both are good thermal-conductivity materials. To illustrate the power of its emitters, Everlight is demonstrating its Dolphin SL family of LED streetlights, which are equipped with its emitters. The 120W streetlights give off around 90-100 lumens per watt at 100-240 voltage and boast a power factor higher than 99%. "We guarantee a 20,000-hour life span for the light. The streetlight has passed the IP65 test for waterproof and dust-proof quality.
Eric Lu says that orders for the company’s lighting emitters are growing, helped by competitive pricing. He concedes that the lights using his company’s emitters are still pricier than traditional lamps, but notes that LEDs are more durable. If more people buy LED lamps, prices will fall more quickly, he says.Its 0.5W emitter is used in the led high bay light bars of refrigerators, and its 1W, 3W and 5W emitters have gone into streetlights, residential lights, signage boards and commercial lights. Its high-power emitters deliver efficiency of over 90lm per watt.
2014年4月3日星期四
the design of the part provides customers with optimal luminous intensity
The lighting can enter in sleep mode and wake up compulsorily by command. It is suitable for LED traffic sign applications while LED panels only need to be turned on occasionally. In the 0-Power mode, the MBI5037 can save power automatically when all the output data are 0. It is suitable for LED traffic message sign, which partial of the LEDs are always turned-off. With MBI5037, users can easily design in their LED traffic sign applications with high efficiency, reliability and low cost.The led high bay light features compulsory silent open- /short error detection which are necessary in traffic sign applications. The MBI5037 can diagnose the individual LED error of whole LED panel including the dark pixels at very low current (0.1mA) within 700ns detection time and can reach flicker-free performance, ensuring the accuracy of information on LED panels. In addition, the MBI5037 is featured with pre-settable threshold voltage for leakage diagnosis and short-circuit detection to comply with the variation of different LED forward voltage.
Alan Bennett, vice president of sales for OPTEK Technology said the combination of red, green, blue and amber high-brightness LEDs provides solid state lighting designers with an extensive number of colour combinations. The star-shaped assembly results in a simplified mounting configuration, while the design of the part provides customers with optimal luminous intensity and transfer of heat generated due to increased current value.Monochrome assemblies are available with mounting pads, while RGBA types have through-hole pins or surface mounting pads.The assemblies are 21mm in diameter on a 1mm thick star-type PCB with six mounting slots.
Applications are foreseen in large signage (interior and exterior), landscape architectural lighting for recreational areas such as pools, spas and boats, and specialty lighting including vending machines, display cases and stage lighting.The program began last year, the company has opened its Taiwan subsidiary Intematix Technology Center (ITC) in led high bay light County, northern Taiwan; acquired a phosphor factory in Suzhou, China; and named Jeff Lagaly, the former Global Sales Director for Cree Lighting, as Vice President of Sales, LED Lighting.
Alan Bennett, vice president of sales for OPTEK Technology said the combination of red, green, blue and amber high-brightness LEDs provides solid state lighting designers with an extensive number of colour combinations. The star-shaped assembly results in a simplified mounting configuration, while the design of the part provides customers with optimal luminous intensity and transfer of heat generated due to increased current value.Monochrome assemblies are available with mounting pads, while RGBA types have through-hole pins or surface mounting pads.The assemblies are 21mm in diameter on a 1mm thick star-type PCB with six mounting slots.
Applications are foreseen in large signage (interior and exterior), landscape architectural lighting for recreational areas such as pools, spas and boats, and specialty lighting including vending machines, display cases and stage lighting.The program began last year, the company has opened its Taiwan subsidiary Intematix Technology Center (ITC) in led high bay light County, northern Taiwan; acquired a phosphor factory in Suzhou, China; and named Jeff Lagaly, the former Global Sales Director for Cree Lighting, as Vice President of Sales, LED Lighting.
2014年4月2日星期三
It comes in a variety of colors
Austriamicrosystems is a leading designer and manufacturer of high performance analog ICs, combining more than 25 years of analog design capabilities and system know-how with its own state-of-the-art manufacturing and test facilities. Austriamicrosystems leverages its expertise in low power and high accuracy to provide industry-leading customized and standard analog products. Operating worldwide with more than 1,000 employees,led high bay light focuses on the areas of power management, sensors & sensor interfaces, portable audio and car access in its markets Communications, Industry & Medical and Automotive, complemented by its Full Service Foundry activities. Austriamicrosystems is listed on the SWX Swiss Exchange in Zurich
Avago Technologies has announced a new competitively priced 1-Watt high power LED emitter for use in solid-state lighting applications. The company said this LED emitter is ideal for use in architectural, contour, retail display, decorative and garden lighting applications. The ASMT-Ax00 LED features a low-profile package design, wide 130-degree viewing angle, and the ability to handle high thermal and drive currents. It comes in a variety of colors.
Solid-state lighting equipment manufacturers are constantly in need of brighter, more reliable high power LED packages. Avago’s ASMT-Ax00 is a high performance LED designed to handle high thermal and high drive currents. By delivering a high flux output of up to 76 lumens at 350mA, this LED features a maximum allowable junction temperature of 125 degrees-C and led high bay light resistance of 16 kV. Moreover, the ASMT-Ax00 is compatible with standard SMT reflow soldering processes to provide lighting designers with more freedom and flexibility in designing their applications.
Avago Technologies has announced a new competitively priced 1-Watt high power LED emitter for use in solid-state lighting applications. The company said this LED emitter is ideal for use in architectural, contour, retail display, decorative and garden lighting applications. The ASMT-Ax00 LED features a low-profile package design, wide 130-degree viewing angle, and the ability to handle high thermal and drive currents. It comes in a variety of colors.
Solid-state lighting equipment manufacturers are constantly in need of brighter, more reliable high power LED packages. Avago’s ASMT-Ax00 is a high performance LED designed to handle high thermal and high drive currents. By delivering a high flux output of up to 76 lumens at 350mA, this LED features a maximum allowable junction temperature of 125 degrees-C and led high bay light resistance of 16 kV. Moreover, the ASMT-Ax00 is compatible with standard SMT reflow soldering processes to provide lighting designers with more freedom and flexibility in designing their applications.
2014年4月1日星期二
their home and save money in the long run
Molica said a string of 300 incandescent holiday lights - which is about average - costs the average Bay Area customer $70.40 in energy during the approximately six-week holiday season. That's compared with 43 cents for the same number of LED lights. That means you save $70 a season if you switch out led high bay light incandescent lights to LED lights.It is impossible to say how many people have switched, but for the past two years PG&E has been offering exchanges and incentives to residential customers, building owners and merchants to put up energy-efficient lights.
Fillmore Street merchants switched out their old lights last year. Virtually all the lighting on Fillmore from Geary to Jackson streets is now energy efficient. Mission District and Noe Valley merchants also switched to LED lights last year, Molica said.More options are also available for consumers. In November, Home Depot offered $3 certificates toward LED lights for people who brought in their incandescent holiday lights. The store also doubled to 30 its selection of kinds of string lights. The store sells 138 eco-friendly yard decor items, artificial trees and other products with energy-efficient lights in them.
"In tough economic times, people still want to celebrate the holidays, so we are trying to make it more affordable to do so," said Kathryn Gallagher, the spokeswoman for Home Depot, which sold 40,000 miles of Christmas lights a year ago, enough to circle the globe 1.5 times. "led high bay light is the trend. We've seen the interest grow and we're expecting to sell more this year. We are trying to educate our customers that they can do simple modifications to their home and save money in the long run.
Fillmore Street merchants switched out their old lights last year. Virtually all the lighting on Fillmore from Geary to Jackson streets is now energy efficient. Mission District and Noe Valley merchants also switched to LED lights last year, Molica said.More options are also available for consumers. In November, Home Depot offered $3 certificates toward LED lights for people who brought in their incandescent holiday lights. The store also doubled to 30 its selection of kinds of string lights. The store sells 138 eco-friendly yard decor items, artificial trees and other products with energy-efficient lights in them.
"In tough economic times, people still want to celebrate the holidays, so we are trying to make it more affordable to do so," said Kathryn Gallagher, the spokeswoman for Home Depot, which sold 40,000 miles of Christmas lights a year ago, enough to circle the globe 1.5 times. "led high bay light is the trend. We've seen the interest grow and we're expecting to sell more this year. We are trying to educate our customers that they can do simple modifications to their home and save money in the long run.
2014年3月30日星期日
the work they have been doing in this area
The project aims to produce high power gallium nitride (GaN) LEDs capable of 95 percent light extraction with an electrical isolation layer designed to dramatically simplify packaging, boost performance and reduce costs for general lighting applications. The research and development programme will run for 24 months. The total project size is led high bay light.Commenting on the Technology Strategy Board's decision to invest in the project, its Chief Executive, Iain Gray noted that innovative research and development, such as the LED lighting for the 21st Century project, will enable the UK to develop world-leading technologies that have global market potential.
PhotonStars pointed out it’s a great win for them and endorses all the work they have been doing in this area. The funding combined with being able to work with such a prestigious team at Cambridge University will enable them to push the boundaries in this all-important area of lighting. They believe they will be able to advance the energy and environmental benefits of LEDs even further.The University of Cambridge’s Professor Colin Humphreys added that they are delighted to apply their GaN growth skills to such an important environmental application for LED technology. LEDs have great potential to dramatically reduce Carbon Dioxide emissions and reduce waste associated with disposal of conventional and low energy light bulbs.It’s disclosed that the government's Technology Strategy Board is investing over £7 million in 12 innovative lighting technology research and development projects, while the Engineering and Physical Sciences Research Council is contributing nearly £1 million to five of the projects.
The company, headquartered in Southampton UK, was founded in 2007 by Dr James McKenzie and Dr Majd Zoorob with the aim of producing world class LED lighting products for general illumination. PhotonStar made its product debut at ARC ’08 launching the first of its led high bay light products, the CeilingStar5-IC, a downlighter for use in fully insulated ceilings. The CeilingStar5 produces 450 Lumens at thermal equilibrium from 8W of circuit power in either warm white or neutral white and provides equivalent illumination to a 60W incandescent downlighter or a 35W MR16 downlighter. PhotonStar LED Ltd has in February acquired an optical and electrical characterization laboratory able to handle LED technology from the LED die, through LED modules to the luminaire. Further info on www.yahamlighting.com
PhotonStars pointed out it’s a great win for them and endorses all the work they have been doing in this area. The funding combined with being able to work with such a prestigious team at Cambridge University will enable them to push the boundaries in this all-important area of lighting. They believe they will be able to advance the energy and environmental benefits of LEDs even further.The University of Cambridge’s Professor Colin Humphreys added that they are delighted to apply their GaN growth skills to such an important environmental application for LED technology. LEDs have great potential to dramatically reduce Carbon Dioxide emissions and reduce waste associated with disposal of conventional and low energy light bulbs.It’s disclosed that the government's Technology Strategy Board is investing over £7 million in 12 innovative lighting technology research and development projects, while the Engineering and Physical Sciences Research Council is contributing nearly £1 million to five of the projects.
The company, headquartered in Southampton UK, was founded in 2007 by Dr James McKenzie and Dr Majd Zoorob with the aim of producing world class LED lighting products for general illumination. PhotonStar made its product debut at ARC ’08 launching the first of its led high bay light products, the CeilingStar5-IC, a downlighter for use in fully insulated ceilings. The CeilingStar5 produces 450 Lumens at thermal equilibrium from 8W of circuit power in either warm white or neutral white and provides equivalent illumination to a 60W incandescent downlighter or a 35W MR16 downlighter. PhotonStar LED Ltd has in February acquired an optical and electrical characterization laboratory able to handle LED technology from the LED die, through LED modules to the luminaire. Further info on www.yahamlighting.com
订阅:
博文 (Atom)