the revolution of novel light sources

Green Lighting Shanghai 2010 will display numerous privately owned, innovative technologies and products.Philips LED lighting solutions-like the Master LED – can replace halide, incandescent and energy-saving lamps. LEDs are preferred to traditional neon lamps in decorative applications because of their smaller carbon footprints, higher brightness, longer life and lower maintenance charge.They also have low pressure capabilities.Philips will also showcase its LED-based AmbiScene Lighting System and a series of uniquely designed, colorful LED lamps for home use.The street and tunnel lamps from Shanghai Sansi Engineering are based on its wholly owned, unique light distribution design software as well as heat sink technologies.This new innovation has overcome the problems presented by traditional structures with its heat sink and secondary light distribution design.These not only reduce lamp volume and weight, they also improve the heat sink effect, extend the LED’s life and enhance luminous efficiency.

Giesecke & Devrient GmbH will display a new patent LED lamp that uses 95% to 98% of the light energy of LED chips to not only stimulate photon bunching, but also facilitate energy saving and low thermal loss through the conversion of YAG fluorescent power. This in turn extends the radiation scope of LED chips in the photon pipe, resulting in higher brightness.How can the Chinese novel light source and energy lighting industry continue to develop at a steady pace in today’s low carbon economy? What innovative designs and applications will be featured at Expo Shanghai 2010? What is the latest progress from the municipal construction of pilot cities for the “Ten Cities and Ten Thousand Lamps” and “Lighting Africa” projects?  All these issues will be explored at Green Lighting Shanghai.


At the same time as the exhibition, a forum featuring two conferences and five summits will focus on topical issues affecting the industry. Nearly 100 key figures from industry-related organizations, colleges and research units have been invited to take part. Dozens of them will deliver speeches on novelty lighting.Senior executives from world famous companies in the trade will also be on hand to participate in discussions on topics like novel energy lighting applications; the revolution of novel light sources and traffic lighting; special lighting designs; smart control system solutions and the development of novel light source displays.They’ll also share insights into the latest research, together with their perspectives on the development of future mainstream technologies and applications.Key figures from industry leaders like Philips and OSRAM will also deliver speeches on overcoming the challenges of developing the industry.

Read more information: http://yahamlighting.blogspot.com/2013/08/as-leading-professional-company-in-led.html

their UL approved and certified LED Street Lights

Many people have the perception that products from China are cheap and of poor quality; however, they have excellent technology and high-quality products. It is important to meet verified and trusted suppliers and HKTDC has helped me with that. I will definitely confirm some orders with the companies I have met at this Expo.The exhibitors from Hong Kong and Guangdong were equally pleased with the opportunity to meet Indian buyers and discuss business with them. Mr Raymond Chan, Germain Holdings Ltd remarked, “A lot of buyers have come here; it is not just the quantity, but they are also quality buyers. They are interested in our solar LED bulbs and tubes and solar rechargeable lanterns.Under a successful Beta test at a Florida Lexus car dealership, which provided valuable rollout information, SavWatt USA, Inc. has decided to cooperate with their supplier Unilumin,  one of the few Chinese companies that have UL approval for LED Street Lights in Shenzhen ,to launch an aggressive marketing campaign for their UL approved and certified LED Street Lights.

Qunkang has been hiring examiners and operators for LCD panel production, ready for Foxconn setting up an 8.5G plant around the Chengdu area.Technological innovation in the LED industry, by 2015, and essentially a more complete LED semiconductor lighting industry chain, gathering more than 200 LED lighting company, LED lighting industry annual output value of 15 billion yuan. Promote the use of two-year investment 150 000 000 40 000 semiconductor lighting.However, there still exists some obstacles to be settle for the development of Dongguan LED technology, including the substrate, epitaxy and chip fabrication technology, and packaging technologies, applications, key technology, supporting key technologies and equipment.At present, the MOEA is negotiating with mainland Chinese authorities over LED illumination tests in select Chinese cities including Xiamen, Guangdong, and Harbin.

The Global Cleantech 100 is designed to provide a barometer of changing face of Global Cleantech innovation, and how the innovation ecosystem's views are changing over time. It is a list of 100 highly promising companies, which represent a bellwether for what has happened in the last year and as an early indicator of emerging and growing trends for technology and market. The Global Cleantech 100 program, in collaboration with the Guardian News and Media, is motivated to draw more attention to the world of innovation and investment in Cleantech, and to celebrate, and give the spotlight to, the people out there making significant advances, growing new business and new industries, and creating jobs.

the new reactors in a dedicated facility

The Multi CHIPLED is one of the black body LED products in MutliLED series,” said Kai-chong Cheng, Marketing Director of OSRAM Opto Semiconductors Asia Ltd. “The MultiLED series also offers white body package for greater brightness. Both black and white package LEDs are silicon encapsulated and have an excellent long lifetime of up to 50,000 hours, keeping maintenance costs at the minimum.The video display market is set to explode with these innovations in LED technology. More and more LED video displays are being installed, from conference rooms to sporting facilities, from shopping mall facades to outdoor advertising space.According to Rock Hsuing, President of Roled Optoelectronics, it’s not an easy task to be selected as their Outstanding Supplier.

The process is an extensive and complex process that includes a review of product quality, level of technical support, order and inventory management processes, post-sales service, and many others. Future Lighting Solutions has proven their excellence in each of these areas and consistently strives to improve their service process, quality, and support of RoledThe Beijing, PR China based institute placed the order during the third quarter of 2010 and following delivery in the second quarter of 2011, the systems will be used for production of electronic devices and red LEDs. The local AIXTRON support team will commission the new reactors in a dedicated facility.

A spokesperson comments, “This is a repeat order for us and over half a decade we have formed a good long-term relationship with the AIXTRON group. We are convinced that these AIXTRON systems will help us to achieve a very high standard of results for R&D in these key technology areas. We have been impressed in initial trials how effectively and easy it has been to scale up device processes from our existing deposition systems to the new AIXTRON systems.

the LED also deposits films at lower temperatures

In his opioion, LED technology has been mature enough to generate super bright light. Advertisers prefer brighter boards to be seen far away, while the key is how to properly use it. He suggested LED boards must consider visible angle and brightness to reduce glare.In contrast to a traditional PECVD reactor used in LED manufacturing, the LED also deposits films at lower temperatures, provides better manufacturing process control and is more energy-efficient.According to doctors, people's eyes will be harmed by prolonged viewing of LED boards. As a result, Professionals suggested the brightness of LED high bay lighting boards should be reduced by two thirds at night and that limits should be imposed on how long the boards are on at night.Beijing has carried out a law in 2008 mandated the position of electronic boards, brightness at night and daytime brightness based on sunlight intensity.

The system was ordered in the first quarter of 2011 and the local Aixtron support team will install and commission the new reactor in the second quarter of 2011 at the dedicated AquaLite power chip LED facility within its mainland China production plant.it’s said that with state of the art epitaxial crystal growth and chip process technology, AquaLite’s LED chips have reached over the 100 lm/W efficiency, and thus are widely used in street lighting, lighting bars, light bulbs, and LED back lighting units.The company also found a new material to replace silver-gilt brackets that are currently used in most LED lights.

Shenzhen–based Foxconn is reported to make a plan to invest in 19 new projects in Central China's Henan province, including factories that will produce camera lenses and LED lighting rigs, as well as more branches of Foxconn's retail chain Cybermart.LED lighting for mass-transportation vehicles, and led lighting fixtures. The standardization pacts will help pave the way for Taiwan`s manufacturers to enter the vast mainland market, according to Taiwan`s industry watchers.who represents Taiwan`s counterparts for three high technologies including LED, LCD panel and solar energy  in both sides of the Taiwan Straits.According to He Wenming, board chairman of the company, The new technologies solve heat problems while lowering costs and improving the lifespan of products. Compared to conventional bulbs, LED lamps can reduce energy consumption by 90 percent and even offer further reductions of 50 percent over the energy-saving lamps on the market today.

show project illustration with LED tube light

Spark LED tube light looks very nice and beautiful, it can save 70% energy, and its life is 10 times than traditional fluorescent tube light. Furthermore, it is almost maintenance-free and don't need to be replaced frequently. Environmental LED light source, with soft light and pure spectrum can help to protect the user's visual and physical health. Cool light source will not bring heat radiation, and isolux with human design also help to focus on attention and improve efficiency.Supermarket is not limited to be chosen a certain kind of lighting fixtures; in fact it can be disposed by different lamps according to the size and grade of the supermarket business area. The following pictures show project illustration with LED tube light, led high bay light  LED Down Light and LED High Bay Light separately.

Osram has given the go-ahead for the project and is negotiating which parts of LEDs and related components it will produce in the country, according to someone who declined to be named as the plans haven’t yet been finalized.Currently, Osram only has production sites for the semiconductor-based technology in Regensburg, Germany, and Penang, Malaysia. So the facility would fill a gap for Osram in China, the world’s largest lighting market at 8 billion euros ($10.6 billion). The company said that it appointed Samuel Wu, a Chinese native who last ran Honeywell International Inc. (HON)’s process solutions business in China, to oversee operations in Asia.According to the company, firstly, in the summer of 2010, its manufacturing from China to Boyertown, PA and now produces LED Tubes with domestic and imported components.

So far, Osram employs about 8,000 people in China, including at an assembly plant for retrofit bulbs using LEDs in Shenzhen, China. It predicts the Chinese lighting market will more than double by 2020. And the scheduled China LED Plant may help it consolidate industry status.In addition, resources from the U.S. Department of Energy have shown that , there are over 2.3 Billion fluorescent tubes in America.  Approximately 600 Million fluorescent tubes burn out each year in America. The led flood light subset of the overall LED market is forecasted to increase at a dramatic average annual growth rate of 75% from 2011 to 2016, according to ElectroniCast.And Independence LED's 300% increase in sales is well above the industry average. Charlie Szoradi – Independence LED, Founder and Chairman, has pointed out that " We credit our growth and leadership position to five key factors: Our Shift in Manufacturing from China to America, Thermal Management, UL Classification, Reseller Support, and the overall Recession that has forced Owners and Managers to look harder at their operating costs.

unique requirements of different customers with great speed

It’s the bilateral cooperation that between Philips and Chengdu has entered a new phase since the two sides signed the LED strategic cooperation agreement last December.Philips will build a fully integrated led lighting Solutions manufacturing site to optimize the allocation of resources including production, warehousing and logistics, etc.The site will help to control production efficiency and quality, increase greatly the responsiveness to clients and shorten the delivery time.It is noteworthy that Philips will focus on providing more customized products to meet unique requirements of different customers with great speed. It will also ensure that Philips can specifically work with Chinese customers to help upgrade their lighting in all segments and applications.

To this end, Philips will organize a professional service team to ensure everything is OK from designing upon a client's request to final product delivery. It is expected that the site will start production in 2013.AIXTRON SE today announced a new MOCVD system order from existing customer Jilin University China. The contract is for one CCS reactor in a 3x2-inch wafer configuration, which will be dedicated to the growth of gallium nitride materials for UV and white LEDs.One of AIXTRON’s local support teams has installed and commissioned the new reactor in a state-of-the-art clean-room facility at Jilin University in Changchun, China.

Zhang of the Jilin University, State Key Laboratory on Integrated Optoelectronics, comments, “We already have experience and a very good understanding of led high bay light systems, and we were particularly impressed with the reactor’s ergonomics and security. The system has set the standard amongst the world's best laboratories, thus we intend to join those ranks. Our intention is to develop exciting new material structures that will lead to greater understanding and to production of gallium nitride materials for UV and white LEDs. This is a challenging task, but we are confident that the combination of the process technology capabilities of the CCS reactor and strong backing from the local AIXTRON support team will enable us to achieve our aims quickly and efficiently.”

how across our LED manufacturing sites

Osram says it is already more than halfway towards its target of making 8,000 job cuts in its traditional lighting business by 2014.Wolfgang Dehen, CEO of Osram said: “LED is the future of the lighting market, where we are already a leader today. Our focus is on profitable growth and we plan to further increase the share of LED-based revenue of our overall business.Last year, Osram announced it will invest more than 100 million in the construction of an LED assembly plant in the Chinese province of Shenzhen. At the led high bay light  1,700 workers will manufacture products for the Asian market.The Chinese company will use PE9000C Series purifier to support a process tool at its facility in the Nanchang High-Tech District in Jangxi, China.

By 2015, production of filament lamps over 60W will be eliminated, with the market share expected to drop to 10 percent. Traditional energy saving lamps will account for 70 percent of lighting product market. LED lighting products, on the other hand, will account for 20 percent of the market.Compared to the traditional lighting products, LED streetlights can save on 30 percent of energy usage, indoor lighting can save on 60 percent energy use, LED backlit products can save 50 percent and LED landscape lighting can save 80 percent of energy used.The plan also lays out nationalization of chips of LED products reaching 80 percent. Luminous efficiency of core devices will step into the leading position of the world. Production of key equipment and materials will also be nationalized, as well as 70 percent of testing equipment.

Veeco has received an order for multi- and single-chamber TurboDisc Systems, including the new MaxBright,President of Epistar Corporation commented, “This latest capacity expansion in Xiamen is in keeping with our goal to maximize our position in the China LED backlighting, automotive and general illumination market. Since we originally selected Veeco as our MOCVD equipment supplier for KaiStar a year ago, we have been extremely impressed with the product quality, service and support we have received. A critical deciding factor has been Veeco’s quick process transfer which is important as we share know-how across our LED manufacturing sites. In addition, the led flood light low cost-of-ownership made it a straight-forward decision to turn to Veeco as we add more tools for KaiStar in 2013.We are pleased to support Epistar and Kaifa as they continue to expand their leadership position in the China market through KaiStar and their other joint ventures. We will remain focused on helping them to achieve their manufacturing goals.”

the energy efficiency of LEDs

LED project manager at BASF Future Business GmbH, noted BASF reached an important milestone in LED research a few years ago. White led lighting can best be obtained by combining red, green and blue light. For a long time, there was no efficient source for deep-blue light. In 2003, BASF researchers laid the foundation for a phosphorescent blue emitter by developing a new class of materials based on an iridium complex. Their aim is to develop stable blue phosphorescence emitters. While the color coordinates and efficiencies of the new blue LEDs are already outstanding, the service life still presents many challenges explains If they manage to produce deep-blue stable emitters, that will open up the way for them to make white LED light tiles with a light yield of more than 100 lm/W.

According to Dr. Karsten Heuser, OPAL Coordinator and Director LED Lighting Technology at OSRAM Opto Semiconductors, in the future, LED will be suitable for general lighting as flat sources of light for offices or as decorative lighting in stores. And they not only offer the potential of being considerably more economical, but are also capable of being used in a variety of ways as flat, transparent and, eventually, flexible sources of light. They will provide completely new opportunities in terms of design and performance in part owing to newly developed semiconductor materials from BASF. The challenge now lies with the process engineers to apply these high efficiencies economically to large active areas.

South Korea, the world’s largest producer of LCDs, is trying hard to develop more efficient LED screens. LED screens are pretty awesome all around, but they have more than a few Achilles Heels to overcome before they're accepted into the mainstream.LEDs must be made to mix green, red and blue lights. Scientists have developed efficient green and red LED materials but they have had problems making a true blue LED material.The discovery was the work of Pusan National University chemistry professor Jin Sung-Ho, who said the discovery was an important one for advancing the energy efficiency of led flood lighting  For gadget lovers, it's yet another piece of the puzzle that, when completed, will mean powerful, beautiful LED TVs are a mainstay in homes across the world.The global LED production capacity is mainly distributed across Korea, Japan and China Taiwan, with the shipments of the top five manufacturers accounting for 98.7% of the global total.

the development of the led lighting

LEDs open up totally new design possibilities for architects, lighting planners and designers – it is possible to create illuminated areas with them such as lit ceilings or partitions. The Orbeos LED panel is the first product developed by OSRAM on the market.Orbeos can be switched on and off without delay and is continuously dimmable. Unlike led flood light its heat management is simple. The panel contains no mercury and emits no UV or infrared radiation. Its brightness level is usually 1,000cd/m2 with power input of less than a watt. In ideal operating conditions it has a lifespan of around 5,000 hours. Orbeos is available with a frosted glass surface. The panels can be easily mounted using spring contacts.

The company recently announced a construction of a new roll-to-roll pilot coating line to manufacture LED lighting within its Hino facility in Tokyo. The pilot line is dedicated to establish production technology toward mass-production and to sell the product on the limited basis. Spending 3.5 billion yen, the line will be completed in the autumn of 2010 and the product will be commercialized within the fiscal year 2010.

In March 2007, Konica Minolta signed a strategic alliance agreement with General Electric Company of the United States to accelerate the development, aiming to commercialize the LED lighting within the fiscal year 2010. Prior to the alliance, in June 2006, Konica Minolta succeeded in developing a white LED device with a world record power efficiency of led lights watt at 1000 candela per square meter, while having practical light emission level of approximately 10,000 hours - a brightness suitable for lighting applications.Such technologies as material, coating, multi-layer design, and optical design technologies, nurtured through the development of photographic film and optical lens, have been fully adopted in the development of the led lighting  For the pilot line, Konica Minolta designed and developed its own roll-to-roll coating method to manufacture flexible plastic base LED lighting. This method will serve as the key to accomplishing cost advantage when the LED lighting flourishes in the future.

the attractiveness of LED displays in the consumer market

This breakthrough has overcome the weakness of the blue emitters on short lifetime and poor colour quality, and it is likely to make LED displays the next wave in consumer displays.This breakthrough enable manufacturers of full colour LED displays to make devices that have significantly longer lifetime, consume less power and more importantly, can emit pure, and brighter blue light that will give more life-like colours to led flood light compared to LCDs and LEDs.In addition, the material is also solution-processable making it easy to manufacture and cost-effective. This could greatly enhance the attractiveness of LED displays in the consumer market.

The Kindred, engineered to provide a room with individualized can opies of light, is a contemporary-styled luminaire that blurs the lines between architecture and lighting. It delivers excellent color rendering quality and over 3,000 glare-free lumens, and suits for indoor ambient applications in office, retail, hospitality and restaurant settings, as well as in architecturally-designed spaces.led lights makes lighting designers fall into raptures. The slim panels-transparent or mirrored when switched off – with their particularly soft light open up entirely new options to creative minds. At the end of 2009, OSRAM presented the first quality panel under the brand name of Orbeos. The round shape and the non-glare light reminded many people of moonlight. OSRAM has now turned Orbeos into a product family and presents two new formats: rectangular-mirrored-warm-white and round-mirrored-warm-white.

The Revel, inspired by the organic shapes of flowers, is a lighting system that gives designers the freedom to create lighting patterns tailored to their unique application. Offering the ability to add to the led lighting architectural elements of a ceiling while providing high-quality ambient lighting, the Revel breaks the traditional design pattern of grid-based luminaire layouts that has been used for decades. With high-quality color and brightness control, the Revel is a first-of-its-kind lighting system. Each Revel module delivers a discrete amount of light that can be positioned where light is needed. Using an innovative plug-in mounting, designers can configure clusters of Revel modules into architectural patterns. It delivers an enhanced visual environment while supporting sustainability imperatives as a result of its flexible design capabilities and use of energy-efficient LEDs.

We are very happy to cooperate with Universal Display

We are very happy to cooperate with Universal Display. This agreement will be mutually beneficial to both companies and it is expected that there will be substantial synergy effects between both of us, global leaders in the LED material industry,” said Byoung Joo Kang, Chief Executive Officer of Duksan Hi-Metal. “There’s no doubt that especially both companies will contribute to the development of the LED industry through the works derived from two companies long mass-production experience and technical know-how.”We are very pleased to announce this strategic collaboration with Duksan Hi-Metal, a leading Korean-based manufacturer of electronic materials for the LED industry. Duksan has built a very impressive team and a state-of-the-art LED manufacturing facility to produce cost-effective LED products using high-quality manufacturing standards,” said Mr. Steven V. Abramson, President and Chief Executive Officer at Universal Display.

It is important to grow our company’s local presence in Korea, and this new relationship helps support the growth of Universal Display’s high-performance products and the expansion of LED manufacturing infrastructure in Korea.This relationship with Duksan in Korea complements Universal Display’s long-term exclusive materials manufacturing relationship with PPG Industries and will bring Universal Display closer to its customer base, enhancing its ability to support their current and future needs.Universal Display and Duksan are also pleased to announce that they have mutually agreed to seek dismissal of all pending patent invalidation proceedings involving the two companies in Korea.

have brought LED technology to a level

Researchers at the University of California at Berkeley have created touch-sensitive “electronic skin(e-skin)” through integrating three distinct electronic components including semiconducting carbon-nanotube transistors, pressure-sensitive polymer sensors and led high bay light  The three components are integrated over large areas on a single plastic substrate, to form a mechanically flexible sensor network that immediately light up when being touched. And the harder it is touched, the brighter the light.

The successes of past funded projects, combined with intensive research, have brought LED technology to a level that enables LED panels to be integrated into high quality designer luminaires. Current LED panels however are too expensive for a wider spectrum of use, for example as part of general lighting. Manufacturing costs intended to be reduced by new forms of materials among other factors are essential conditions that dictate prices.

Each pixel in the active matrix of the device contains a nanotube transistor with its drain electrode connected to the anode of an LED. A pressure-sensitive polymer is laminated on top of the led flood light and it is in electrical contact with the cathode of the LED at each pixel. The top surface of the polymer is made conducting by coating it with silver ink and acts as the ground contact. When the device is touched, current flows through the polymer layer and switches the LED on.Our e-skin is the first flexible system that responds to pressure stimuli of varying intensities and provides a real-time response by emitting light through the integrated LED display,” team member Chuan Wang says. “In the system, LEDs are turned on only where the surface is touched and the intensity of the emitted light depends on the amount of pressure applied. This basically allows us to visualize the applied pressure.

the LEDs are always turned off

The MBI5037 can enter in sleep mode and wake up compulsorily by command. It is suitable for LED traffic sign applications while LED panels only need to be turned on occasionally. In the 0-Power mode, the led high bay light can save power automatically when all the output data are 0. It is suitable for LED traffic message sign, which partial of the LEDs are always turned-off. With MBI5037, users can easily design in their LED traffic sign applications with high efficiency, reliability and low cost.

The MBI5037 features compulsory silent open- /short error detection which are necessary in traffic sign applications. The MBI5037 can diagnose the individual LED error of whole LED panel including the dark pixels at very low current (0.1mA) within 700ns detection time and can reach flicker-free performance, ensuring the accuracy of information on LED panels. In addition, the MBI5037 is featured with pre-settable threshold voltage for leakage diagnosis and short-circuit detection to comply with the variation of different LED forward voltage.Numerous companies enter the LED Driver market and further stimulate LED industry development and offer customers diverse choices. On the other side, such development will be a great challenge for new comers to strike a balance between efficiency and customers’ habit.

Of course, the efficiency of voltage boost via the charge pump is lower than that in the other way.No matter in lighting or back lighting applications, the product designer has to face the problem of raising the driver transfer efficiency. To improve the transfer efficiency is not only beneficial for portable products to extend standby time but is also an important means to solve the led flood light dissipation problem. In lighting, the use of the high power LED also underlines the problem of enhancing the transfer efficiency.

how quickly pricing will improve is difficult to predict

Due to low industry pricing for two through four inch core products, the Company decided to sell a limited quantity of those products in the quarter. Raja Parvez, President and CEO of Rubicon Technology, commented, “We saw strong demand for our six-inch polished wafers in the led lighting, particularly from the led market. We continue to be the largest provider of six-inch polished wafers in the market due to our strength in both large diameter crystal growth and large diameter polishing, evidenced by the fact that we have now shipped over 400,000 polished six-inch wafers to date into the LED and SoS markets.”

While the pricing environment has not improved for two through four inch core products, the Company has started taking orders for those products for delivery in the first and second quarters in order to begin reducing inventory levels and maintain customer relationships. With Rubicon’s resumption of sales into this market, pricing has decreased further. William Weissman, CFO of Rubicon Technology, said, “Current pricing of two through four inch core products is now below our carrying cost in finished goods and led flood light inventory for those products. As a result, we recorded a $1.6 million adjustment in the period to reflect the value of those products in inventory at the current market price. We believe that our competitors are now selling smaller diameter cores at cash cost in order to reduce inventory or to keep utilization rates high. However, excess capacity in the market is gradually being absorbed and we believe the pricing environment should eventually improve. Exactly when and how quickly pricing will improve is difficult to predict.”

The Company reported a sequential reduction in margins due primarily to the lower smaller diameter product pricing and resulting inventory adjustment. The loss per share in the fourth quarter was $(0.05) as compared with a diluted EPS in the third quarter of a positive $0.01 per share.

Commenting on the outlook for the first quarter of 2013, Mr. Parvez said, “With the accelerating growth of the general lighting sector of the LED market and with the increasing complexity of mobile devices creating greater opportunity for SoS technology, I am very excited by the longer term growth potential of the markets we serve. However, they are evolving markets and we will likely continue to see shorter term volatility. In the first quarter, our six-inch wafer orders will be lower. Similar to what we experienced last year, our largest LED customer for six-inch wafers has excess inventory and will not likely need additional material until the second quarter. Also, our led lights customer recently announced that their orders are down based on weaker than expected sales by a key end customer. However, they also expressed confidence in a strong second half of the year based on the expected introduction of new smartphone models by their end customers later in the year. As a result, six-inch revenue will be lower in the first quarter. But, we believe we will see strong orders for six-inch wafers in the second half from both the SoS and LED markets.”

thereby benefitting the LED makers and LED packagers

Despite the condition that LED packaging order visibility is still under a month, Everlight has been aggressively paving the way for the backlight and lighting business; investors project that Everlight’s third-quarter revenues may reach $90~105 million, an encouraging 15% QoQ growth.   Outlook for the third quarter – the traditionally peak season for shipments, coupled with GaN chip shortages, has lent a helping hand to the stabilization of LED prices, thereby benefitting the LED makers and LED packagers, whose third-quarter revenue forecasts are expected to extend its rising streak.Unity Opto’s efforts in the investment of medium- and large-sized LED backlight has finally paid off in 2009 – stimulated by the successful adoption of LED TV into Samsung’s supply chain and increased LED notebook penetration, Unity Opto’s orders continue to boom in Q3.As the vanguard in the field, Samsung introduced the first series of LED TV and sold some 500 thousand units in the last six months. The launch triggered various brand vendors such as LG, Sharp, Sony to follow suit, and benefitted Yaham's LED chip makers Epistar and FOREPI.

Samsung has increased its order quantity with FOREPI and Epistar, to pave the way for the introduction of its new 8 series and 9 series. Over 50% of FOREPI’s third quarter capacity is dedicated to Samsung and LG. Even though LG’s subsidiary LG Innotek has an in-house fab, but its chip technology does not meet the required specifications for LED TV, therefore, LG’s entire LH90 series is transferred to FOREPI, accounting for 24% of it capacity. If LG continues to increase its order in the fourth quarter, 60% of FOREPI’s capacity will be filled by LG and Samsung. The remaining capacity will be allocated to other Yaham manufacturers such as Innolux and Coretronic as they prepare for the launch of their LED monitors, thus we can expect FOREPI’s capacity to be fully-loaded.

As LED TV garners more attention, its penetration will likely increase and underpin the growth of FOREPI’s revenue and margin after its record high revenue growth in July.Our strong Q4 results were an outstanding finish to a very good year and reflect the success of our strategy to drive growth in LEDs and LED lighting applications," stated Chuck Swoboda, Cree chairman and CEO. ―Entering fiscal 2010, our Q1 backlog is very strong as we see growing demand across our LED product lines. We are well positioned to benefit from the worldwide growth in LED lighting. As such, we continue to invest in the new products, channels and technical support needed to accelerate the LED lighting revolution.